Overcome production challenges in the field or at the production facility using fit-for-purpose solutions.
Published: 08/02/2022
Published: 08/02/2022
An operator offshore Australia wanted to clean up three wells flowing at 150 MMcf/d through a temporary well test separator. Bypassing separators on previous campaigns and producing without cleanup had resulted in liquid contaminants entering the system. In addition, a subsea well with a high condensate/ gas ratio required separation at 150 MMcf/d to minimize the risk of fallout at the flare. The operator needed a timely solution to reliably clean up the ultrahigh-flow-rate wells and measure the output to verify deliverability.
To manage the high flow rates effectively, a Production ExPRESS solutions fluid preconditioning package was deployed with high-capacity twin separators. To ensure the best results, the customized solution design included studies of flow regimes, thermal expansion, and relief system design, as well as simulations of flaring heat and noise. The operations were digitally integrated via the Concert well testing live performance system, which uses software, sensors, and cameras deployed across the wellsite to provide real-time monitoring, improve data analysis, and confirm environmental conformance through its flare monitoring feature.
Other important solution components, assembled for the first time globally, included
The dual separator configuration made it possible to maximize flow rates to 150 MMcf/d during well cleanup and to prove deliverability while
Data sharing using the Concert performance system lowered the risk of miscommunication between crew members and enabled quick response to operational triggers through advanced diagnostics and computation. The system transformed the operator’s well test experience into a digital ecosystem where all key participants were connected and alerted to make timely, informed decisions.
Fluid preconditioning
Production ExPRESS rapid production response solutions achieved cleanup for three wells with high condensate/gas ratio at rate of 150 MMcf/d through highcapacity separators operated in tandem, without bypass. The EverGreen minimal environmental impact well effluent burner supported low-emissions flaring.