全国最大的快3平台-全国快3信誉最好的老平台

全国最大的快3平台-全国快3信誉最好的老平台

Geothermal Well Productivity: Why Hotter is Not Always Better | 全国快3信誉最好的老平台-全国最大的快3平台

Geothermal Well Productivity

Published: 06/20/2008

Premium
Schlumberger Oilfield Services

This paper investigates the practical range of net power capacity available from conventional and enhanced geothermal system (“EGS”) wells as a function of temperature. For a geothermal resource temperature up to about 190 degC, which is the operating temperature limit of presently available downhole pumps, wells are typically pumped and power is usually generated in a binary-cycle plant, and in rare cases in a flash-cycle or hybrid-cycle plant. In this temperature range under the current state of downhole pump technology, the net MW capacity of a well has a practical upper limit of about 7.3 MW, irrespective of how high the well’s productivity index is. This capacity limit cannot be improved unless technology can be improved to allow pumping at a higher rate than the present practical limit of about 160 l/s (2,500 gallons per minute); improving the temperature tolerance of pumps, by itself, will not increase this capacity limit.

For resource temperatures greater than 190 degC, wells must be self-flowed, and power is generated from such wells in a flash-cycle or hybrid-cycle plant. In the temperature range of 190 degC to nearly 220 degC, a self-flowing well’s net power capacity (irrespective of its productivity index) is less than the maximum of 7.3 MW available from a pumped well. Above 220 degC, the net power capacity of a well increases rapidly with increasing temperature and productivity index, and the practical upper limit is determined only by well design; the larger the well diameter the higher is the upper limit. The maximum net power capacity available from an EGS well depends on reservoir depth and local temperature gradient, the optimum depth being increasingly shallower for higher temperature gradients. The trend of decrease in the optimum depth with temperature gradient applies whether this optimum is defined in terms of the maximum net MW capacity of a well or the minimum drilling cost per net MW capacity.

To request abstracts or topics from previous years, please contact geothermexinfo@kusanagiatsuko.com.

THIS ITEM IS PREMIUM CONTENT. TO ACCESS THE FULL CONTENT, SIGN IN OR REGISTER BELOW.
Sign in or register